Luc
ST Crew
She is dead for now but she will live again
Posts: 59
|
Post by Luc on Apr 20, 2005 21:35:54 GMT -5
|
|
|
Post by 4thgenceli on Apr 21, 2005 10:46:39 GMT -5
AFAIK, it will fit w/ the stock GT tranny. I can't seem to figure out what Gen that GTE is, so there might be starter clearance issues, but thats fixable. I'm just warning ya, I can't see the feedbacks because of the firewall here, but with only 21 feedbacks, and a 92.0% score..I wouldn't trust them myselves.. But that's IMO, so... Have fun
|
|
Leusent
GT Crew
The Good Looking One
Posts: 274
|
Post by Leusent on Apr 21, 2005 11:16:51 GMT -5
They claim its a twin turbo?
|
|
|
Post by 4thgenceli on Apr 21, 2005 12:00:09 GMT -5
BS all the way.
|
|
|
Post by snyder on Apr 21, 2005 12:54:19 GMT -5
That is a 88-89 Single Entry turbo out of a Alltrac. It will work with the trans. I just swapped a Gen2 3SGTE into a 88GTS. I had to use the flywheel, pressure plate, and starter off the 3SGTE. I used a 3SFE trans, and a racing clutch disc for a GTS If you don't you will strip the trans spindle. You will need the wiring harness, all the sensors, and the ECU.
|
|
Luc
ST Crew
She is dead for now but she will live again
Posts: 59
|
Post by Luc on Apr 24, 2005 14:16:39 GMT -5
i was just goin to go to a junk yard for the wiring harness and ECU. i spung a bearing in my motor yesterday so know i guess i have to get the engine not thats its a bad thing.
|
|