|
|
Post by racerb on Sept 29, 2004 20:55:48 GMT -5
Was just reading the how-to on making urethane bushings for your motor mounts, author of the story said he had trouble with the cardboard sticking. I would try using wax paper between the bushing and the cardboard, hey it works for everything else. I will hopefully be doing this mod pretty soon myself, so I'll let ya'll know if it works. racerb  |
|
|
|
Post by White87GT on Sept 29, 2004 21:35:42 GMT -5
Was just reading the how-to on making urethane bushings for your motor mounts, author of the story said he had trouble with the cardboard sticking. I would try using wax paper between the bushing and the cardboard, hey it works for everything else. I will hopefully be doing this mod pretty soon myself, so I'll let ya'll know if it works. racerb Lemme know. If it does I'll edit the writeup. |
|
|
|
Post by schmooot on Oct 14, 2004 21:40:22 GMT -5
Ya I just grabbed the nearest thing to me and it happened to be cardboard. Hell wax paper would work just fine, or that waxed cardboard that some veggies come in. Just an update, it took a few days but they have finally loosened up a little and the whole car doesn't vibrate as much. But I can notice a helluva lot more low-end torque, of course you saw my front mount in the writeup, and the rear wasn't even bolted to the tranny. My motor moved at least 6 inches when I took off.
|
|
