|
|
Post by 4thgenceli on Jun 27, 2005 14:56:32 GMT -5
Here's the way I'm doin my intake mod. Using this tube here.  It will extend up to 3ft. I'm gonna run it to the MAF, and then either put a cone filter on the end there, or run another tube through the fender and have it come out of the front of the car. One of my old car buddies used this in his Honda.. and it worked just as well as the pipes, actually kept it a little cooler(apperaently the plastic don't take as much heat as the metal??) It's NOT black either.. but Blue(pic was U/A) |
|
|
|
Post by malodin on Jun 27, 2005 22:02:47 GMT -5
if you notice, its just an rv sewer drain hose you can get at any hardware store:) i measured them they are the same as the ones you can get now at autoparts stores
|
|
|
|
Post by phillk6751 on Jun 28, 2005 0:44:53 GMT -5
I'm doing that this thurs or fri...I'm gunna use a rotozip to cut the stock hole bigger to fit. I'll let you know how it went, I'll probably take some pictures and put it up in the DIY section.
|
|
|
|
Post by 4thgenceli on Jun 28, 2005 10:19:36 GMT -5
I'm doing mine Tomorrow.. I dunno about pics though.... digi cam is dead.
|
|
|
|
Post by 4thgenceli on Jun 28, 2005 13:48:38 GMT -5
Ok.. dumb question.. anybody know if a local parts shop has the MAF adaptor bracket? I really don't wanna wait 3 days for shipping...  |
|
86CelicaSt
GT Crew
1986 Toyta Celica ST
Posts: 201
|
Post by 86CelicaSt on Jun 28, 2005 15:15:54 GMT -5
Yep they sure do.....autozone,kragen, and napa  |
|
|
|
Post by 4thgenceli on Jun 28, 2005 15:20:48 GMT -5
Autozone nope.... Checker nope.... I refuse NAPA those over-prices assholes..
I thought BAP, but don't know if they would carry that stuff.
|
|
86CelicaSt
GT Crew
1986 Toyta Celica ST
Posts: 201
|
Post by 86CelicaSt on Jun 28, 2005 15:34:21 GMT -5
What the hell is BAP?? Well at autozone did you ask someone or did you look for it yourself?? It should be by the air filters,etc.
|
|
|
|
Post by 4thgenceli on Jun 28, 2005 16:13:56 GMT -5
www.bapimportparts.comIt's an Arizona-based import car part shop. I went and looked myself. They have the round adaptors, but not the one for our car 
|
|
|
|
Post by 4thgenceli on Jun 30, 2005 13:39:31 GMT -5
It's done. Sounds mean as hell now. I had to fight to get the lower resonator out of the fender-well. As soon as I move the battery to the back, I'm gonna run it into the front of the grill |
|
|
|
Post by malodin on Jul 1, 2005 7:48:05 GMT -5
pix?
|
|
|
|
Post by 4thgenceli on Jul 1, 2005 9:55:42 GMT -5
Digi cam is dead.... It was done just like Dan did his... just removed the stock airbox and resonator.. put the cone filter in there. I'm waiting until I get the time to relocate the battery..then it's going out the front.. or out the fender.. not too sure yet.
|
|
