cbr74
New Member
1988 GT Liftback
Posts: 44
|
Post by cbr74 on Feb 23, 2005 11:36:23 GMT -5
I've installed power door lock solenoids so I now have keyless entry with my alarm. Now I'm looking into a power window conversion as well. The mechanicals will likely be aftermarket but I'd like to keep the interior looking stock, so my question is... can the PDL, PW controls as seen here: memimage.cardomain.net/member_images/12/web/624000-624999/624230_7_full.jpgbe put onto a GT, non PW, non PDL door panel? Any thoughts, suggestions, or recommendations are appreciated.
|
|
|
Post by blck87gtconv on Feb 23, 2005 14:45:33 GMT -5
Easily, but you'll need to get the correct PW bezels to replace the stock ones with. The switch is the lock lever that you already have. You can get the stuff at a junk yard, and you'll see what I mean.
|
|
|
Post by Rick89GTS on Feb 24, 2005 1:50:36 GMT -5
....Now I'm looking into a power window conversion as well.....The mechanicals will likely be aftermarket but I'd like to keep the interior looking stock.... Aftermarket? Like Jason said, just go to the wreckers and get the mechanicals. Everything will bolt in but you'll need the door pulls and interiors panels to cover up your old manual crank-up holes.
|
|
mrgud
ST Crew
'87, GT-S
Posts: 84
|
Post by mrgud on Feb 25, 2005 11:44:44 GMT -5
yep--- junkyard... if you can... take bouth of the doors... complete and the wireing to the right door... easier to do the mod if you have an example of the original one.... The panels... I don't know about you, but I've seen only gray panels... yours are brown (first seen it on your pic)... so the best way is to take a plastic corke (cover... I think Yugo has the same colour interior - no joke) and glue it on the dor panel... That is the Balkanic way... or you can just take the panels with the window engine and switches from another celi
|
|