|
|
Post by duff99 on Mar 24, 2005 9:43:01 GMT -5
I am swapping a 2s-e and 3s-ge engine. The 2s-e and 3s-ge throttle bodies are different and so are the mounting points for the throttle cables. Does anyone have any suggestions?
Thanks
|
|
|
|
Post by White87GT on Mar 24, 2005 12:26:23 GMT -5
I am swapping a 2s-e and 3s-ge engine. The 2s-e and 3s-ge throttle bodies are different and so are the mounting points for the throttle cables. Does anyone have any suggestions? Thanks You should have a 3S-GE throttle body and TPS assembly. Use that. Don't attempt to use the 2S-E system. Also, you can reroute the throttle cable, and the assembly should be the same. The only difference would be the cruise control system, assuming either enigne had one. |
|
|
|
Post by duff99 on Mar 28, 2005 0:26:52 GMT -5
The throttle cable from the 2s-e is to short to reroute to the 3sge mounting bracket???
|
|
|
|
Post by buzzbomber87gts on Apr 8, 2005 14:41:35 GMT -5
if you cant get the tps to hook up then dont worry about it. it should run just fine disconnected.
|
|
|
|
Post by White87GT on Apr 9, 2005 12:55:17 GMT -5
if you cant get the tps to hook up then dont worry about it. it should run just fine disconnected. It won't run with the TPS disconneted. VERY bad idea. |
|
|
|
Post by buzzbomber87gts on Apr 9, 2005 17:01:01 GMT -5
It won't run with the TPS disconneted. VERY bad idea. my 22re does  |
|
